Bitte benutzen Sie diese Kennung, um auf die Ressource zu verweisen: http://bibliotecavirtual.dgb.umich.mx:8083/xmlui/handle/DGB_UMICH/5172
Titel: Efecto de los elementos microaleantes (Nb, Ti, V, B) sobre la microestructura de aceros alto manganeso de plasticidad inducida por maclaje (TWIP) tratados térmicamente
Autor(en): Díaz Martínez, Gladys Yvette
Adviser: Mejía Granados, Ignacio
Stichwörter: info:eu-repo/classification/cti/7
IIMM-M-2012-0128
Acero
Plasticidad
TWIP
Erscheinungsdatum: Aug-2012
Herausgeber: Universidad Michoacana de San Nicolás de Hidalgo
Zusammenfassung: The overall objective of this project is to determine the effect of microalloying elements (Nb, Ti, V and B) on the microstructure of high manganese steels twinning plasticity (TWIP) induced solidification condition, heat treatment of homogenization, rolling hot, heat treatment and heat treatment solubilized static recrystallization. In order to eliminate the dendritic structure, is carried out a homogenization treatment at 1200°C for 5 hrs, the thermomechanical treatment hot rolling was performed at 1200°C with 60% reduction in thickness for the regeneration of the microstructure from hot rolling solubilization treatment was performed at 1200°C for 1h., followed by water quenching. Finally, heat treatment of static recrystallization and 750°C 650°C constant time and were applied for the steels which were plastically deformed by cold 40% uniaxial tensile elongation. The steels were characterized by optical (LOM) and electron microscopy (SEM), diffraction (XRD) Vickers microhardness order to show evidence necessary to determine the evolution of the microstructure and mechanical properties and X-rays. In each of the heat treatment steps.
El objetivo general de este proyecto es determinar el efecto de los elementos microaleantes (Nb, Ti, V y B) sobre la microestructura de aceros alto manganeso de plasticidad inducida por maclaje (TWIP) en condición de solidificación, tratamiento térmico de homogenización, laminación en caliente, tratamiento térmico de solubilizado y tratamiento térmico de recristalización estática. A fin de eliminar la estructura dendrítica, se llevó a cabo un tratamiento de homogenización a 1200°C por 5 hrs, el tratamiento termomecánico de laminación en caliente se realizó a 1200°C con 60% de reducción de espesor, para la regeneración de la microestructura proveniente de la laminación en caliente se realizó un tratamiento de solubilización a 1200°C durante 1hr., seguido de temple en agua. Finalmente, se aplicaron tratamientos térmicos de recristalización estática a 650C y 750C y tiempo constante, para lo cual los aceros fueron deformados plásticamente en frío mediante tracción uniaxial un 40% de alargamiento. Los aceros fueron caracterizados mediante microscopia óptica (LOM) y electrónica (SEM), difracción de rayos-X (DRX) y microdureza Vickers con la finalidad de mostrar evidencias necesarias para determinar la evolución de la microestructura y propiedades mecánicas. En cada una de las etapas de tratamiento térmico.
Beschreibung: Instituto de Investigación en Metalurgia y Materiales. Maestría en Metalurgia y Ciencias de los Materiales
URI: http://bibliotecavirtual.dgb.umich.mx:8083/xmlui/handle/DGB_UMICH/5172
Enthalten in den Sammlungen:Maestría

Dateien zu dieser Ressource:
Datei Beschreibung GrößeFormat 
IIMM-M-2012-0128.pdf2.75 MBAdobe PDFMiniaturbild
Öffnen/Anzeigen


Alle Ressourcen in diesem Repository sind urheberrechtlich geschützt, soweit nicht anderweitig angezeigt.