This tesis is about the specially process to design a general hospital, with the necesary tools of design and beginning since the concepts to the functional architecture throught executive plans. To begin with, the area of villas of the pedregal has been taken into account since it does not have any nearby health area and there is an app population in the area and its surroundings, after implement the necessary investigations to implement the project in that area and being acceptable will proceed to the elaboration of the project, following all the relevant rules that are required for the proper functioning of said hospital. Starting mainly from the concepts necessary for the design of this same, starting by choosing a base idea for the project through images or paintings this to get the architectural plan, once chosen the design begins with the distribution in plan dividing into different areas where the public is divided with the private as well creating zones of comfort and functionality in a design different from hospitals and at the same time respecting the regulations provided for this project. After the architectural plan is defined, the construction plans such as foundation, slabs, masonry, and then with the electrical installations, sanitary and hydraulic installations begin to be made, and to finish lighting and special installations, referring to the project also covers what are 3D renderings of how the hospital would be completed in its entirety. Finally, a parametric cost calculation was implement.
Esta tesis muestra el procedimiento que se hace para realizar un proyecto de un hospital general concentrándose en el diseño de este mismo y teniendo unos cimientos desde la ejecución de los conceptos de diseño hasta los planos arquitectónicos y ejecutivos. Para comenzar se ha tomado en cuenta el área de villas del pedregal ya que no cuenta con ninguna área de salud cercana y existe una apli población en la zona y sus alrededores, después de realizar las investigaciones necesarias para para llevar a cabo el proyecto en dicha área y ser aceptables se procederá a la elaboración del proyecto, siguiendo todas las normas pertinentes que se requiere para el buen funcionamiento de dicho hospital. Partiendo principalmente de los conceptos necesarios para el diseño de este mismo, empezando por escoger una idea base para el proyecto a través de imágenes o de pinturas esto para sacar la planta arquitectónica, una vez escogido el diseño se empieza con la distribución en planta dividiendo en diversas áreas donde se divide lo público con lo privado así mismo creando zonas de confort y funcionalidad en un diseño distinto a los hospitales y al mismo tiempo respetando el reglamento que se proporciona para este proyecto. Después de que la planta arquitectónica quede definida se empiezan a realizar los planos constructivos como son los de cimentación, losas, albañilería, y después con las instalaciones eléctricas, instalaciones sanitarias e hidráulicas, y para terminar iluminación y instalaciones especiales, referente al proyecto también se abarca lo que son renders 3D de como quedaría el hospital en su totalidad finalizado. Para finalizar se realizó un calculó de costos paramétricos.