Tesis: Envíos recientes

  • Supervisión web automatizada para enlaces de fibra óptica en CFE Telecom 
    Sánchez Rodríguez, Carlos Freynier (Universidad Michoacana de San Nicolás de Hidalgo, 2012-10)
    In this work the design of a system Web is illustrated. The purpose is monitorear the state (I Activate / Inactive) of the teams that you/they intervene in the interconnection of nets, through links of optic fiber administered ...
  • Simulación de sistemas digitales usando el software 20-SIM 
    Villagómez Rivera, Jesús (Universidad Michoacana de San Nicolás de Hidalgo, 2012-10)
    In this thesis an investigation of the use of simulations throughout history and today was made. It was investigated and demonstrated the importance of using digital systems for modeling and design of systems and their use ...
  • Modelado de un sistema de generación de energía eléctrica basado en energía undimotriz 
    Vázquez Villaseñor, Josué Oswaldo (Universidad Michoacana de San Nicolás de Hidalgo, 2012-03)
    This work involves designing a system for obtaining energy from the waves to be converted into electricity. The goal is that it can be used in applications of small and medium scale located on the waterfront, which are ...
  • Análisis de un generador síncrono-bus infinito basado en la medición de su campo magnético 
    Salto Díaz, Rodolfo Carlos (Universidad Michoacana de San Nicolás de Hidalgo, 2012-08)
    When I talk about a magnetic field, the first thing that comes to mind is how it is defined, therefore, I immediately think of Faraday's law, since this law allows us to measure the intensity of the field in a defined ...
  • Análisis de campos magnéticos en máquinas eléctricas usando el MEF y COMSOL 
    López Castillo, Francisco (Universidad Michoacana de San Nicolás de Hidalgo, 2012-08)
    Differential equations are mathematical models that accurately describe a lot of problems, especially problems and physical phenomena related to the field of engineering. However, it is important to note that sometimes the ...
  • Control de un motor de inducción trifásico utilizando lógica difusa 
    Zepeda Ornelas, Diego Armando (Universidad Michoacana de San Nicolás de Hidalgo, 2012-03)
    In this paper the planning, investigation and verification of the thesis project called control of an induction motor using fuzzy logic is performed. The general and specific objectives have been set, followed by the ...
  • Simulación de una unidad de generación de una central termoeléctrica 
    León García, Julio Albert (Universidad Michoacana de San Nicolás de Hidalgo, 2012-06)
    not availableThe thermoelectric power stations are able to produce mediating electric power the combustion of fossil elements, this cycle begins in the generator of vapor which evaporates the water and it produces the vapor ...
  • Análisis de circuitos eléctricos modelados en Bond Graph 
    Santana Ramírez, José Luis (Universidad Michoacana de San Nicolás de Hidalgo, 2012-05)
    Electricity one of the best known physical phenomena, it is so common now in modern society. This phenomenon is due to the movement of electrons. This property and the practical applications derived result in an electrical ...
  • Características experimentales de operación de la máquina de CD 
    Ulloa Alfaro, David (Universidad Michoacana de San Nicolás de Hidalgo, 2012-01)
    Although the industrial sector employing machines direct current (DC) is lower, it is one of the most versatile in the industry for easy control of position, speed and torque. The current machines (DC or cd) convert ...
  • Confiabilidad de lámparas portátiles basadas en led 
    Villanueva Martínez, Ignacio (Universidad Michoacana de San Nicolás de Hidalgo, 2011-12)
    Reliability is an issue that concerns most of the producers of electronic devices, since today it is closely tied to technological development because of guaranteeing the life of a product. Led (the acronym LED: Light-Emitting ...
  • Modelado dinámico y simulación de sistemas mecánicos basados en el método de Lagrange 
    Velázquez Delgado, Antonio Daniel (Universidad Michoacana de San Nicolás de Hidalgo, 2012-01)
    In this thesis the Lagrange method for obtaining the dynamic model of mechanical systems is presented. It begins with the analysis of Newton's method from his second law both linear and rotational case case. It gives an ...
  • Modelado y simulación de una central hidroeléctrica 
    García Rivera, Alfonso (Universidad Michoacana de San Nicolás de Hidalgo, 2012-01)
    Today electricity generation is a subject that is known in most parts of the world, the most common form of generation is by power plants which are of different types. A power station is essentially a system that employs ...
  • Caracterización de subestaciones eléctricas en centrales eléctricas 
    Mendoza Vaca, Benjamín (Universidad Michoacana de San Nicolás de Hidalgo, 2012-03)
    In the first chapter we have what is a brief introduction to the characterization of the electrical substations in power generation plants, the aim sought to carry out this thesis, the justification has to do the work and ...
  • Diseño y construcción de un sistema de control bola y placa basado en micro controlador 
    García Ramírez, Jorge Luis (Universidad Michoacana de San Nicolás de Hidalgo, 2012-02)
    In industry there are stable and unstable systems that must be applied a control scheme to stabilize. Although most systems there are many other stable unstable. In this paper the design and construction of a physical ...
  • Proyecto de una central nucleoeléctrica en el país 
    Pérez Rodríguez, Israel (Universidad Michoacana de San Nicolás de Hidalgo, 2011-12)
    In the world there are different types of energy provided by nature like waterfalls, ocean currents, flow of rivers, streams wind, solar and geothermal energy, of which get their energy for conversion into electricity. ...
  • Diseño y construcción de una montura altazimutal para telescopio controlada vía micro controlador e interfaz gráfica 
    Alanís Gudiño, Gustavo (Universidad Michoacana de San Nicolás de Hidalgo, 2011-12)
    This paper describes the process performed for the construction of a prototype of a telescope mount altazimutal and perform control positioning thereof through steps controlled engine by a microcontroller that receives ...
  • Control de un manipulador con dos grados de libertad basado en micro controladores PIC, utilizado como rotulador sobre madera 
    Carreón Silva, Ángel (Universidad Michoacana de San Nicolás de Hidalgo, 2011-11)
    In this thesis the control of a manipulator, for controlling movement in the X, Y, Z which has two degrees of freedom and is used as a marker on lumber. The manipulator is based on a type aluminum trestle structure, U-shaped, ...
  • Simulación de una central eléctrica con turbina de gas 
    Arriaga Maya, Agustín (Universidad Michoacana de San Nicolás de Hidalgo, 2011-11)
    As the first part of this paper gives an introduction and are some of the big reasons that were taken to analyze this type of plant and the structure and follow it. Then we talk about the different types and forms of ...
  • Instrumentación de una central eólica utilizando LabVIEW 
    Ramos Vega, Paul (Universidad Michoacana de San Nicolás de Hidalgo, 2011-11)
    In this thesis an instrumentation system which is based on virtual instrumentation occurs. From this a series of procedures for the acquisition and sampling of related information with a wind develops. As specific phenomena ...
  • Uso de estructuras modulares de emergencia durante el restablecimiento de líneas de transmisión colapsadas y su simulación mediante el software Lindsey 
    Suárez Meza, Víctor (Universidad Michoacana de San Nicolás de Hidalgo, 2011-11)
    For 10 years I have developed my professional performance at the Federal Electricity Commission; in the Construction area for a period of 3 years and in the Transmission operational area, belonging to the Western Transmission ...

Buscar en DSpace


Búsqueda avanzada

Listar

Mi cuenta