IIn this work, mine tailings are consolidated through geopolymerization reactions to be of a satisfactory mechanical property and the toxic substances in mine tailings are immobilized. To approach the geopolymerization of ...

Plates of as-received (hot rolled) Nb-stabilized AISI-347 austenitic stainless steel, 7 mm in thickness, were gas metal arc welded using an ER-310 filler wire. Some joints were plainly welded (0 mT) whereas in others an ...

The present research project shows the results obtained from the mechanical and microstructural characterization of welded joints leading with and without Electromagnetic Interaction of Low Intensity (EMILI) applying ...

Bone tissue engineering is an excellent alternative to reduce bone disorders and conditions, by bone regeneration from the combination of biomaterials and cell therapy. In the research project, the scaffolds were fabricated ...

The synthesis, characterization and measurement of mechanical and thermal properties of the ceramic composites based on the gadolinium-gadolinium zirconate and lanthanum-aluminate zirconate zirconate systems is reported. ...

The properties of nickel-based films are investigated for which surface coatings on substrates were synthesized grade O1 tool steel and API X-52 consistent binary Ni-P alloys and ternary Ni-P-Al2O3 high phosphorus content ...

The present work analyses the effect of boron addition over the optima l processing window and wear behavior of an austempered ductile iron ADI. Three different compos it ions were used with 0, 60 and 120 ppm of boron ...

Understanding the behavior of the oscillations of the jets into the mold of thin slab funnel is essential to ensure a constant supply of liquid steel, improve control of the flow patterns and consequently increase plant ...

This work was developed in two stages in order to analyze the effect different weld parameters on the microstructure and mechanical properties taking into account different forms of the base materials, welding process and ...

Plates (6.35 mm thick) of 2205 duplex stainless steel (DSS) with a single V groove preparation were gas metal arc welded in a single pass using an ER-2209 filler wire. Welding parameters were adjusted to input 1.4 kJ/mm ...