The present work involves the synthesis of nanaostructured catalysts Ce1-xMxO2 {M=La, Ru, X = 0.05, 0.1}, obtained by means Sol-Gel method, and also as nanotube or nanorod like-shapes, prepared by means of hydrothermal treating under NaOH presence and using a high pressure Teflon lined reactor. The materials obtained were characterized by the techniques: SBET, SEM / EDS, XRD, TEM, and TPR. EDS analysis showed us that results were obtained very close to the stoichiometry proposal. It was noted a reduction in the crystal’s size of the catalytic systems through XRD. Combining this technique with TPR could corroborate the formation of a solid solution. TEM revealed the formation of polycrystalline structures in the like-shape of nanotubes or nanorods with diameters of less than 300 nm. The synthesized materials were evaluated as catalysts in the oxidation of CO using a tubular bed packed reactor, in some systems conversions reaching 100% at temperatures near to 100° C.
El presente estudio comprende la síntesis de catalizadores nanoestructurados de la forma Ce1-XMXO2 {M=La, Ru, X = 0.05, 0.1}, sintetizados por el método de sol-gel, a fin de obtener las formas de nanotubos o nanobarras, se les aplicó un tratamiento hidrotérmico en presencia de NaOH, utilizando un autoclave de alta presión recubierto de teflón. Los materiales obtenidos se caracterizaron mediante las técnicas: SBET, SEM/EDS, XRD, TEM, y TPR. Una vez obtenida la estequiometria mediante EDS, donde se obtuvieron resultados muy cercanos a la estequiometria propuesta, se observó una reducción en el tamaño de cristal de los sistemas catalíticos mediante XRD; combinando esta técnica con TPR se pudo corroborar la formación de una solución sólida. El análisis realizado utilizando TEM reveló la formación de estructuras policristalinas en forma de nanotubos o nanovarillas de diámetros menores a 300 nm. Los materiales sintetizados fueron evaluados como catalizadores en la oxidación de CO utilizando un reactor tubular de lecho empacado, alcanzando en algunos sistemas conversiones del 100% a temperaturas cercanas a 100º C.